All posts by bbosch

IXUS Update 3.6 (17) available

As the end of the year approaches, we are proud to release another update to IXUS Compliance Management software – version 3.6 (17). This minor release contains a number of stability improvements and bug fixes as well as some updates to third party libraries.

We’ve added the AS2772.2 option to the IXUS uncertainty model, which allows our clients to specify their own expanded uncertainty allowance. If the user specified value exceeds the maximum value from Table 6.1 of the AS2772.2:2011 standard, the resulting expanded uncertainty is capped at the maximum value, and the simulated fields in IXUS are increased by the amount with which the user specified value exceeded the maximum value. This allows our Australian clients to comply with the AS2772.2 requirements. Along with the uncertainty model changes, we have added report content controls for the uncertainty model and values used, so that it can be added to reports for reference purposes.

We are also very happy to report that we have once again added support for generation of 3D PDF documents in the IXUS Modeller. We managed to find suitable replacement libraries for a number of outdated ones used before, making IXUS more stable and robust.

For more information or for access to the latest installer of the IXUS Manager  please contact

IXUS 3.6 released!

This year has been full of changes in the EMF compliance environment in terms of standards and requirements. Amongst others, the revised Canadian Safety Code 6, 2015 standard was released which required some updates from our side. This combined with a number of customer visits and feedback sessions gave us some new insights on regulatory requirements, how the software is used, as well as problems experienced. It has guided our development and helped us focus on what is important. Here are a few of the notable changes and new features.

IXUS Modeller 3.6

  • Disable/Enable antenna(s) or antenna groups by operator
  • “Alt” key snaps to mouse pointer rather than 10cm grid
  • Improvements in antenna placement
  • Signage and annotations duplicate and move and rotates like objects
  • Updates to blueprint libraries and support for PDF transparency
  • Antenna azimuth uses mouse input to set angle in the 3D view

IXUS Manager 3.6

  • New “Structure Height” text field and content control for reports
  • Antenna enable/disable on the antenna tab and on reports
  • Content controls for “Highest antenna”, “Lowest antenna”, “Number of antennas” as well as “Antenna model version number”.

Unfortunately with the replacement of the PDF libraries we’ve had to remove the 3D PDF export functionality. This was a difficult decision but from customer feedback we established that 3D PDF is a secondary requirement and the costs of the libraries and maintenance thereof are not justified. We have also learned a lot in the development of the all new IXUS Antenna Portal and the plan is now to implement the modern libraries and frameworks used on the portal in IXUS Manager.

Access IXUS Solo Modeller 3.6 on our Downloads page or contact for the IXUS Manager server installer.

All new antenna portal now online!










We are proud to announce the newly released antenna portal. This was completely redeveloped from the ground up on the latest and best libraries and promises to be faster and more responsive than ever before.

Users can search, filter and download easily from thousands of antennas making it easier to find antennas based on properties rather than manufacturer and model numbers. We are planning to implement a lot of the improvements in the IXUS Manager soon so watch this space.

The new platform might require users to register again depending on if the accounts were transferred correctly. If you have any trouble or queries please don’t hesitate to contact

A better way to find antennas, even without model numbers!

We have added a number of new search options on the IXUS Antenna Portal. Users can now filter on antenna height, gain, vertical and horizontal beam-width and approximate frequency in easy to use dropdown menus. This makes it possible to filter the antennas down to show a much shorter list when the actual antenna model number is not available.

The problem with many antenna installations is that it is often not well documented. Compliance assessors and operators have to do a lot of research and guessing when it comes to unmarked and unidentified antennas. We are hoping that these new features would make it easier to find an antenna that resembles and operates in the parameters without having to find the antenna manufacturer and model numbers. It would also enable users to find a suitable substitute antenna should the required antenna not be available.

The changes will be available on the antenna portal later today.

IXUS Update 3.5 (42) available

IXUS update 3.5 (38) is available for download.

This installer will update your IXUS Manager to version 3.5(42) and the IXUS Modeller to version 3.5 (19). This is a minor update but does add support for a number of new frequency bands and also adds a few new content controls for use in the EME Guide templates. Below are a few more changes worth mentioning.

  • More updates to the uncertainty model
  • Frequencyband aliases added for LTE 850, LTE 2300 and WiMAX 2300
  • New content controls for use in the Australian EME Guides
  • Default antenna owner setting
  • Workplane snapping modifications
  • Updates to Show all/Hide All and selections
  • A number of other bugfixes and improvements
For more information or installation details please contact

IXUS Software at 2014 Wireless Infrastructure Show, booth 614

Wireless Infrastructure Show




Come and see us to find out more about EMF compliance software at the 2014 Wireless Infrastructure Show, May 19 – 22 at the Rosen Shingle Creek in Orlando, Florida. We will be in booth 614

The Wireless Infrastructure Show is the industry’s premier event focusing on mobile infrastructure for 4G and beyond. The three-day conference and trade show brings together technology and Telecom executives, policy-makers, financial analysts and national media for a world-class speakers, a dynamic exhibit hall, technical seminars, unparalleled networking, special events and much more.

Join representatives from across the wireless ecosystem for learning, networking and more at the Rosen Shingle Creek in Orlando, Florida on May 19 – 22, 2014.

Register at

IXUS 3.5 available now with many new features and improvements

We have just released IXUS Version 3.5.

Meet Jeff. He is a contractor that repairs air conditioners, waterproofing, elevators and other equipment on building roofs. He is also a rigger and able to climb towers to install and maintain antennas. Jeff is one of the new features in IXUS 3.5. He is a person annotation and he was added in IXUS to give users a better understanding of the scale of their installations. The purpose of compliance simulations is to establish whether there is an accessible exclusion zone and Jeff is the perfect annotation to demonstrate this right there in the 3D view. If Jeff is able to access an exclusion zone, there is a good chance that access to that area needs to be controlled and signs need to be put up on the access route to warn Jeff that the RF levels might exceed the standards.

Jeff the human annotation
Jeff – Annotation

Jeff also requires compliance documentation on site and a good idea is to provide Jeff with a copy of the compliance assessment document. IXUS Manager quickly generates these documents in a few clicks through the report wizard. We have made a number of improvements in version 3.5 in the report wizard including a step to add photos that were uploaded in the IXUS Manager. We have also added a few more content controls to make more information from the database available to be used in reports.

For the change log please expand the post below.

Continue reading

We are proud to announce IXUS version 3.4

We have been very busy in keeping up with advances in antenna designs and EMF compliance techniques and are very proud to announce the release of IXUS 3.4.  Proper support for various antenna types, full 3D rendering of compliance zones and one click document generation makes IXUS the most advanced EMF compliance tool available. Here are a few of the things you will notice in this release.

We reworked our internal representation of antenna models to support multi-port antennas as well as multi frequency band configurations on our custom antennas models.  IXUS 3.4 also supports much higher power levels on antennas, accommodating levels typically used for radio and television broadcasting.  These changes led to the optimisation and refinement of the IXUS calculator, now updated to Version 12.2.

IXUS EMF Complaince 3.4We’ve added a point to point method to create environmental slices, similar to the way the polygon and building shapes are created. This makes adding an environmental slice on oddly shaped objects and roofs much easier.  We have also made big improvements to the interaction speed of the IXUS Modeller with regards to rendering of environmental slices. The detail levels are adjusted dynamically which makes it possible to add multiple environmental slices without slowing the application down.

We’ve extracted the safety standards into an isolated level. This allows users to update or add new safety standards without having to update the IXUS Modeller software.  Users can perform calculations at the proposed (in some cases more conservative) levels even before they are published, future proofing simulations and reducing the number of re-assessments required.

Supported standards still include the ICNIRP limits endorsed by the World Health Organisation, ‘FCC (OET65)’ standards used in the USA, ‘BRV B11’ used in Germany, and the Industry Canada (IC) ‘Safety code 6’ standards. This update allows us to be much more flexible in the build-up and roll out of proposed changes.

Have a look below at the change log and keep an eye out for the update.

Continue reading

IXUS 3.3 released

We wish all a productive and compliant 2013!

After a year of hard work and dedication we are happy to announce the release of IXUS 3.3.  Improving IXUS in terms of usefulness, efficiency and user friendliness has helped many operators, assessors and consultants to become experts in the field of electromagnetic safety.  The quality and accuracy of the results combined with the efficiency of the management system reduces the need to consult with, or appoint highly qualified and expensive personnel.

In keeping up with the fast pace of technology IXUS now supports all the latest LTE wireless communication standards at the various frequency bands in use.  A highly requested feature was added to allow users to calculate an exclusion zone at a user specified level of the selected standard.  This allows assessors to simulate an exclusion zone at variable levels for example at 25% of the specified standard.

Custom exclusion zones

We also improved the integration between IXUS and the Online Antenna Portal making it easy to get the antennas that are not available on your database.

After marketing and investing internationally we have successfully entered the North American markets by supporting the compliance standards published by the FCC and Industry Canada Safety Code 6.  We will continue to update and improve the IXUS calculator and we hope that this is the start of many new good relationships.

Please download the latest version of IXUS Solo Modeller or evaluate the latest IXUS Manager online from our download page.

IXUS 3.0 EMF Simulation and compliance management software released

It has been a busy year for the IXUS team and we are very proud to announce the launch of IXUS 3.0.  The product has evolved over time into a more complete, comprehensive EMF compliance solution that we are all very proud of.  It’s been simplified into pluggable modules giving users the option to select only the functionality required, be it EMF simulation, RF measurement, or just data management and reporting.

It’s been extended to contain various internationally accepted EMF standards like ‘FCC (OET65)’ used in the USA, ‘BRV B11’ used in Germany, and the Canadian ‘Safety code 6’.  An uncertainty model in line with IEC 62232 was developed making it possible to adjust the confidence interval for the simulation results.  IXUS 3.0 has a new fresh look and feel that we hope breathes a bit of new life into the repetitive nature of the job.  Improvements in reporting allows both custom template reports to be added and existing report templates to be edited using Microsoft Word, making reports fully customisable.

We are looking forward to your feedback.

Full change-log follows…

Continue reading